WAN 2.2 I2V - POV Body Cumshot & Pullout

WAN 2.2 I2V - POV Body Cumshot & Pullout - LOW v1.0

NSFW

This lora is trained on POV clips of finishing from the missionary position and ejaculating on the woman's body (b0dyshot). About half of the clips feature the man pulling out (pull0ut), for the other half the penis is already visible in the first frame.

It supports 3 finishing types: man jerking himself (s3lf), woman jerking the man (p4rtner), and a hands-free orgasm with no jerking at all (sp0ntaneous).

The woman's head was clipped out of all of the training data so it will not affect faces. You'll have to prompt for her facial expression, otherwise it seems to default to annoyed/uninterested XD

The woman's hands need to be somewhat near the penis in the initial image for her to grab it.

Example prompt:

b0dyshot (pull0ut) (s3lf / p4rtner / sp0ntaneous)

The video shows a man ejaculating on a woman's stomach and chest.
(The man pulls out. He pulls his penis out of her vagina)

He ejaculates on her stomach and breasts.
Her body and breasts covered in cum.
The cum spreads thickly across her stomach and breasts.
A huge, thick load of white cum shoots from the penis. the cum lands with a wet splat, spreading thickly across her stomach and breasts.
The woman is happy.

[The man is stroking his penis]/[The woman is stroking his penis]/[The penis is not being stroked. The penis ejaculates spontaneously, without being touched.]

Description

FAQ

Comments (42)

FLOW0308Oct 10, 2025· 5 reactions

CivitAI

Thanks a ton for the LoRA! Now I don’t have to dive into researching this part anymore—really appreciate it

sirbazzrickOct 10, 2025· 6 reactions

CivitAI

i think you inadvertently created a VERY good handjob lora.... nice work :D

TwoMoreLurker

Author

Oct 10, 2025

Glad you enjoy! Yes this one is a bit of a scattershot, there's a little bit of something for everyone :)

sirbazzrickOct 10, 2025

@TwoMoreLurker what do you train on? i want to get into lora training but the set up is a right pain in the arse and cant get it to even start up locally.. i have a 5090

TwoMoreLurker

Author

Oct 10, 2025· 2 reactions

@sirbazzrick I've actually written a guide about it here: https://civitai.com/articles/18985/wan-22-local-lora-training-guide-windowslinux

I'm no expert and there are plenty of folks on this site who are more knowledgeable & experienced than I am so take everything in there with a grain of salt, but I hope it helps you get started :)

FLOW0308Oct 10, 2025· 1 reaction

@TwoMoreLurker I just read your article and realized we have almost the same setup—3090 GPU, local training, default settings, Windows, and even using someone else's Ubuntu environment to run things. It felt super relatable, haha. Just the I2V and T2V models alone take up over 200GB on my drive. My CUM LoRA was trained under these pretty rough conditions. So when I upgrade my PC, I’m definitely getting a dedicated hard drive just for AI stuff—this hobby eats up so much space! Just sharing casually, haha.

sirbazzrickOct 10, 2025· 1 reaction

@TwoMoreLurker awesome, ill see if i can get it running from your guide and let you know :D cheers!

1661204908Oct 10, 2025· 3 reactions

CivitAI

You are a god, it is almost impossible to ejaculate in this position before this lora comes out, and without lora, you often take the "penis" down and hang it in the air to scatter semen, which is funny

robycOct 10, 2025· 1 reaction

CivitAI

This looks amazing! Can't wait to try it!

xiaobai9009Oct 10, 2025· 4 reactions

CivitAI

Wow, finally someone solved this issue, and now it can naturally pull out and ejaculate in my long video workflow! Thank you very much! Suggest it works better with other ejaculation lora combinations

robycOct 12, 2025· 1 reaction

Do you remember which one by any chance? It will save me some time on the research XD

xiaobai9009Oct 13, 2025· 1 reaction

@robyc WAN 2.2 Anime Cumshot Aesthetics – Precision Load I2V (Beta version) The main improvement here is a more realistic ejaculation scene, and it is recommended to set the intensity to around 0.5.

andriudzban629Dec 16, 2025

Have you managed to make a real pull out? When a penis is not visible in the initial frame and a man pulls out it from the woman. I tried everything and results are terrible. Penis is glued or disappear. I added every other "helper" loras for penises, vaginas etc. and nothing helped.

_p4r4n01dOct 12, 2025· 2 reactions

CivitAI

This is great, I've been waiting for a pullout lora for a week now. It has problems with massive members, but I can't expect it to work in every case. Thank you!

chickdrinkOct 15, 2025· 2 reactions

funny, my girlfriend has no issue with massive members.

AikoYukiOct 20, 2025· 4 reactions

CivitAI

Great! please make another pull out cumshot for cowgirl/reverse cowgirl position!

I have a question for a problem, how to make cum not come out from the woman's mouth? it's weird.

TwoMoreLurker

Author

Oct 21, 2025· 1 reaction

Agreed on the random cum coming out of her mouth, it's not my favorite either. I don't even know where it came from since there's no faces/facials in the dataset :(

AikoYukiOct 23, 2025

@TwoMoreLurker yeah it's annoying, I had to do several tries to get decent result 😭 because facial isn't really my cup of tea

sarashinaiOct 20, 2025· 4 reactions

CivitAI

Ignoring all other things, you know what this has given us? That pulse. I don't see that pulsing in any other lora. Brava!

TwoMoreLurker

Author

Oct 21, 2025

Glad you enjoy, I aim to please :)

NUGGZ1616Oct 21, 2025· 6 reactions

CivitAI

what strengths are recommended? Im getting some odd outputs. detached penis, discolored, distorted...

TwoMoreLurker

Author

Oct 21, 2025· 2 reactions

If the lora strength is too high the image will get a bit fried (especially if you're using other loras), but it shouldn't cause distortion or discoloration. It sounds like an issue with your workflow, try lowering your CFG.

Setian91Nov 28, 2025

CFG on 1 Lora's 0.3 - 0.5 str unless you use DaSiWa's checkpoint, those can be used with str 1

If you use dreamplay lora I suggest to disable that one on the pull out shot, getting really bad results with that lora, which makes somewhat sense.

crmbzDec 20, 2025

Ive been getting good/acceptable results (actually a pull out as it should be finally) using high noise strength 0.2 and low noise strength 0.5, with the DaSiWa Wan Model https://civitai.com/models/2190659?modelVersionId=2467350

OrangeJuiceAlienNov 1, 2025· 1 reaction

CivitAI

can you do same for T2V?

AikoYukiNov 1, 2025

CivitAI

do you have any prompt list for facial expression of the woman?

TwoMoreLurker

Author

Nov 2, 2025· 1 reaction

I do not, I think for the sample images I literally just put "The woman is happy".

naughtyskynetNov 23, 2025· 4 reactions

CivitAI

Ok, I have an issue with the "pull out" phase: the penis lenght...it literally takes the part already out and add just the gland on it, making it Super short (>.<)

LangtonIndustiresNov 27, 2025

sad.

andriudzban629Dec 15, 2025· 1 reaction

Same for me. And even worst - after pulling out no vagina or anus. I tried many "anus helper" loras and it never worked for me. Ah... and my favorite - man pulls out his penis from himself :D

Setian91Nov 28, 2025

CivitAI

I tried the partner pull out prompt as you listed in the examples and I tried some of the other user, but I never get the partner pull out after 20 attempts.

It looks more like spontaneous and most of the time clips to the woman's body, is there something I'm doing wrong?

What checkpoint gives the best result?

This edited prompt gave me the best results so far:

Video shows a woman elevating upwards then grabs man's penis with her hand pulling penis out of her vagina, p4rtner pull0ut. Then a man ejaculating on a woman's stomach and breasts, b0dyshot. The woman pulls the man out. She pulls his penis out of her vagina. He ejaculates on her stomach and breasts. Her body and breasts covered in cum. The cum spreads thickly across her stomach and breasts. A huge, thick load of white cum shoots from the penis. the cum lands with a wet splat, spreading thickly across her stomach and breasts. The woman is happy. The woman is stroking his penis. Lastly, The woman stares innocent and satisfied, slightly smiling and blushing, she winks her eye at the viewer.

crmbzDec 20, 2025· 1 reaction

Try using this Wan Model, my first video I generated using this LoRA here got pretty much what to expect. I copied a prompt from the examples, used the DaSiWa model and got a pull out with a cumshot on her body. And I was using high noise strength 0.2 and low noise strength 0.5, might help too.
https://civitai.com/models/2190659?modelVersionId=2467350

CyberOkarunDec 12, 2025

CivitAI

Hello everyone! Could anybody give me a hand with getting this LoRA to work? I can’t seem to make it function properly. No matter what I do, it just shows the man still hip-thrusting—or, if I’m lucky, a bucket of white paint falls from the ceiling XD.

I’m using Smooth Mix Wan 2.2 (I2V/T2V 14B) with the LoRA set to high: 1 and low: 0.5, but I’ve also tried different strengths with no luck. I’ve even tried combining it with other LoRAs referenced in other's generations, and still nothing works.

Thanks in advance!

crmbzDec 20, 2025

crmbzDec 20, 2025· 10 reactions

CivitAI

To everyone having issues with this LoRA, not getting a pull out, try using the DaSiWa Wan Model.
I tried a NSFW Wan model, the smooth mix model and the standard Wan model, all gave shitty results with not pulling out, weird throw ups of liters of milk and whatnot. First generation with the DaSiWa model was pretty much on point using a copied prompt from the examples.
And I was using high noise strength 0.2 and low noise strength 0.5, might help too.
https://civitai.com/models/2190659?modelVersionId=2467350

TheFatControllerJan 22, 2026

Hey. Thanks for the tip. I'm already using the DaSiWa Wan 2.2 model but I still can't seem to get an actual pullout in any of my generations, regardless of the high and low noise strengths.

I'm starting from an image of a woman with a mostly off-screen man and his penis is in her vagina, but it just doesn't seem to want to pull out! Any ideas or anything you've learned since your comment?

aberge3663Jan 22, 2026

CivitAI

Is there a way to get more volume of ejaculate? Also with the penis out can you prompt for a faster cumshot? There is a lot of xtra motion and the cumshot either doesn't happen or isn't completed within the 5 second window.

TwoMoreLurker

Author

Jan 22, 2026

Not really, unfortunately. :(

BobRobertsMar 2, 2026· 1 reaction

You might try combining this with https://civitai.com/models/1962545/cumfacial-wan22?modelVersionId=2460386 or https://civitai.com/models/1922973/f4c3spl4sh-cumshot-i2v-wan-22-video-lora-k3nk?modelVersionId=2178869 but you'll have to tweak values/prompt if you don't want a lot of it going on the girl's face too. Base model is also very important, I've had subpar results with anything but the q8 DaSiWa as a base. (I can't find tastysin version link I think it's been replaced by sythnseduction https://civitai.com/models/2269796?modelVersionId=2554882 which I'm downloading to test now)

DekotaDEE69Mar 6, 2026

CivitAI

anyway you can update this so the penis can also be seen from the underside? it currently only flips to the top side of the penis in full nelson or or other postions where the penis is seen form under neath or the bottom side. other than that i love this lora!!! thanks so mcuh!!

user519635Apr 12, 2026

CivitAI

This works really well, any tips for increasing the volume of the cum?

TwoMoreLurker

Author

Apr 12, 2026

You'll have to combine with another lora unfortunately, though there are plenty of them out there.

LORA

Wan Video 2.2 I2V-A14B

by TwoMoreLurker

Download (Beta) View on CivitAI

action

cumshot

Details

Downloads

20,194

Platform

CivitAI

Platform Status

Available

Created

10/10/2025

Updated

6/17/2026

Deleted

Trigger Words:

b0dyshot

pull0ut

sp0ntaneous

s3lf

p4rtner

Files

WAN-2.2-I2V-POV-Body-Cumshot-Pullout-LOW-v1.safetensors

Size:

585.10 MB

SHA256:

e1485d2b705f4b6fdd94e36835e68a9b7d86b73c10ba5a8c92e149f5753ca1db