<h1 id="introduction">Introduction</h1>💪 UniFlex isn't just a workflow...it's a unified flexible and extensible framework, where things look and work roughly the same regardless of the model used or imaging task required. The most commonly used tools for local AI image generation are at your fingertips, while a suite of power tools are at the ready when needed.The workflow is heavily annotated 🗒️ and includes a number of pre-configured samples 📦 for you to learn and build, without needing to buy access or dig through intentional obfuscations (e.g., node stacking). Native ComfyUI nodes have been used as much as possible, with the Core 🦴 edition requiring only five custom node packages (or just three in one of the pre-configured samples!)...and chances are good you already have these!🔮 <a target="_blank" rel="ugc" href="https://www.krea.ai/krea-2">Krea 2</a> remains the flagship model for the latest major version. However, other models supported with annotations, instructions, and/or pre-configured workflows include <a target="_blank" rel="ugc" href="https://huggingface.co/circlestone-labs/Anima">Anima</a>; <a target="_blank" rel="ugc" href="https://bernini-ai.github.io/">Bernini-R</a>; <a target="_blank" rel="ugc" href="https://boogu.org/">Boogu-Image [Edit]</a>; <a target="_blank" rel="ugc" href="https://huggingface.co/lodestones/Chroma1-HD">Chroma1-HD</a>; <a target="_blank" rel="ugc" href="https://fireredimage.com/">FireRed-Image-Edit</a>; <a target="_blank" rel="ugc" href="https://flux1ai.com/dev">Flux.1 Dev</a>; <a target="_blank" rel="ugc" href="https://bfl.ai/blog/flux2-klein-towards-interactive-visual-intelligence">Flux.2 Klein 9B</a>; <a target="_blank" rel="ugc" href="https://ideogram.ai/models/4.0/">Ideogram 4</a>; <a target="_blank" rel="ugc" href="https://github.com/jd-opensource/JoyAI-Image">JoyAI-Image-Edit [Plus]</a>; <a target="_blank" rel="ugc" href="https://qwen.ai/blog?id=qwen-image-2512">Qwen-Image [Edit]</a>; <a target="_blank" rel="ugc" href="https://stability.ai/stable-image">SDXL</a> (incl. <a target="_blank" rel="ugc" href="https://huggingface.co/OnomaAIResearch/Illustrious-xl-early-release-v0">Illustrious</a>, <a target="_blank" rel="ugc" href="https://civarchive.com/models/257749?modelVersionId=290640">Pony</a>, etc.); and <a target="_blank" rel="ugc" href="https://tongyi-mai.github.io/Z-Image-homepage">Z-image</a>.Development and testing occurred on the following system:<ul><li>Operating system: Linux Mint 22.3 Cinnamon with 124 GB RAM</li><li>Processor: 11th Gen Intel© Core™ i9-11900 @ 2.50GHz × 8</li><li>Graphics card: NVIDIA GeForce RTX 3060 with 12 GB VRAM</li><li>Browser: Google Chrome</li></ul>Please report bugs 🪲 or errors 🚫, as well as successes 🤞 and requests/suggestions 📝. Post and share your SFW creations!!! I spent a lot of time working on this project (((for no 💰))), so I hope others make good use of it and find it helpful.<img src="https://image.civitai.com/xG1nkqKTMzGDvpLrqFT7WA/44c21d9c-cd1e-40e2-8ce4-2283d323af88/original=true/44c21d9c-cd1e-40e2-8ce4-2283d323af88.jpeg" /><h1 id="power-tools-*">Power Tools *</h1>Background Removal &amp; Segmentation:<ul><li><a target="_blank" rel="ugc" href="https://huggingface.co/ZhengPeng7/BiRefNet">BiRefNet</a> †, <a target="_blank" rel="ugc" href="https://huggingface.co/egeorcun/lucida">Lucida</a> †, and <a target="_blank" rel="ugc" href="https://huggingface.co/facebook/sam3.1">SAM 3.1</a> †</li></ul>ControlNets, Detailing, &amp; Inpainting:<ul><li>🔮 <a target="_blank" rel="ugc" href="https://github.com/facok/comfyui-krea2-controlnet">Krea 2 ControlNet</a></li><li><a target="_blank" rel="ugc" href="https://civarchive.com/search/models?baseModel=Flux.1%20D&amp;baseModel=Flux.1%20S&amp;modelType=Controlnet&amp;sortBy=models_v9">Conditioning ControlNets</a></li><li>🔮 <a target="_blank" rel="ugc" href="https://github.com/kgilper/krea-reference">Krea 2 reference images controls</a> —so fun!...kind of like Flux Redux</li><li>🔮 <a target="_blank" rel="ugc" href="https://github.com/lbouaraba/comfyui-krea2edit">Krea 2 editing</a></li><li><a target="_blank" rel="ugc" href="https://github.com/scraed/LanPaint">LanPaint</a> with <a target="_blank" rel="ugc" href="https://github.com/lquesada/ComfyUI-Inpaint-CropAndStitch">Crop-and-Stitch</a></li></ul>LLMs for Text &amp; Vision:<ul><li><a target="_blank" rel="ugc" href="https://deepmind.google/models/gemma/">Gemma</a> † and <a target="_blank" rel="ugc" href="https://qwen.ai/">Qwen</a> † models</li></ul>Prompting:<ul><li>Prompt enhancers (LLM-driven)</li><li>Wildcards (<a target="_blank" rel="ugc" href="https://github.com/geroldmeisinger/ComfyUI-outputlists-combiner">OutputLists Combiner</a>)</li></ul>Upscaling:<ul><li><a target="_blank" rel="ugc" href="https://openmodeldb.info/">Model-based</a>, <a target="_blank" rel="ugc" href="https://research.nvidia.com/labs/sil/projects/pid/">PiD</a> †, <a target="_blank" rel="ugc" href="https://github.com/Comfy-Org/Nvidia_RTX_Nodes_ComfyUI">RTX Super Resolution</a>, <a target="_blank" rel="ugc" href="https://github.com/ByteDance-Seed/SeedVR">SeedVR2</a> †, <a target="_blank" rel="ugc" href="https://github.com/LoganBooker/SesquiLSR">SesquiLSR</a>, and <a target="_blank" rel="ugc" href="https://github.com/Fanghua-Yu/SUPIR">SUPIR</a> †</li></ul>XY Plots:<ul><li>XY plots (<a target="_blank" rel="ugc" href="https://github.com/geroldmeisinger/ComfyUI-outputlists-combiner">OutputLists Combiner</a>)</li></ul>* = stripped down Core 🦴 edition is also included in the download package; † = native ComfyUI implementation<h1 id="what's-new">What's New?</h1><ul><li>[12.x] This major version basically represents a culmination of the incremental improvements made through the 11.x series, with some additional changes to custom node packages, QOL improvements, and a new color scheme. 🔮 <a target="_blank" rel="ugc" href="https://www.krea.ai/krea-2">Krea 2</a> remains the flagship model, with additional components and settings particular to its use.</li></ul><ul><li>[12.3] Added SesquiLSR latent upscaling; getting much better results than ComfyUI's native methods.</li><li>[12.3] Cleaned up the Prompt Builder subgraph; gives better demonstration of some possibilities for constructing wildcard prompts.</li><li>[12.3] Collapsed many of the GetNodes into subgraphs for a cleaner look.</li><li>[12.3] Trimmed down annotations and instructions in the core workflow that mostly applied to the main workflow, or covered more complex configurations.</li><li>[12.3] Restructured the Prompt group by moving several components into the Prompt subgraph.</li><li>[12.3] Found some speed optimizations by removing preview image and text nodes inside subgraphs that were running for no reason (in most cases).</li><li>[12.3] Additional tweaks and QOL improvements.</li></ul><ul><li>[12.2] Added Krea2Edit back in after several alternatives were reviewed. [12.2] Made some tweaks to the default settings that should give better (cleaner, sharper) results...maybe? [12.2] Additional tweaks and QOL improvements. [12.1] Replaced as many nodes from the Easy-Use and rgthree packages as possible, with the former no longer required at all and the latter only used for the Switchboard (which can be removed if a user wants to just mute groups by scrolling around). The core workflow was also trimmed of custom nodes and now requires just ONE (KJNodes)!</li></ul><h1 id="known-issues">Known Issues</h1><ul><li>[12.x] 🛑 LAYOUT NOT COMPATIBLE WITH NODES 2.0 🛑</li><li>[12.x] The included pre-configured sample workflows are provided for proof of concept, but the most up-to-date workflows will always be the 🔮 Krea 2 and 🔮 Krea 2 —Core workflows.</li><li>[12.x] Several argument flags are known to have incompatibilities with many models and configurations, so start ComfyUI without them when testing things out. These are known to have been problematic for me: --fast, --force-channels-last, --fp8_e4m3fn-unet, and --use-sage-attention.</li></ul><h1 id="quick-start">Quick Start</h1><ol><li>Install or update <a target="_blank" rel="ugc" href="https://github.com/comfyanonymous/ComfyUI">ComfyUI</a> to the very latest version. Follow the <a target="_blank" rel="ugc" href="https://docs.comfy.org/installation/system_requirements">official Comfy documentation</a> or your favorite <a target="_blank" rel="ugc" href="https://www.youtube.com/results?search_query=install+comfyui&amp;sp=CAI%253D">YouTube installation video</a>, if needed.</li><li>Check that <a target="_blank" rel="ugc" href="https://github.com/Comfy-Org/ComfyUI-Manager">ComfyUI Manager</a> is available, or install it.</li><li>Download the 🔮 <a target="_blank" rel="ugc" href="https://www.krea.ai/krea-2">Krea 2</a> model, along with its text encoder and VAE, from the <a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/Krea-2">Comfy-Org Hugging Face repository</a>.</li><li>Open the pared down Core 🦴 edition of the 🔮 <a target="_blank" rel="ugc" href="https://www.krea.ai/krea-2">Krea 2</a> workflow in ComfyUI. (Later you can try the main workflow.)</li><li>Use the Manager to Install Missing Custom Nodes.</li><li>Restart ComfyUI.</li><li>Open the workflow again and follow the General Workflow Defaults instructions. For now, this will basically be to load your diffusion model, CLIP, and VAE (01a), and then temporarily bypass the LoRAs subgraph (03c; only the subgraph, not entire sub-group).</li><li>Run the default text-to-image recipe 🥣.</li><li>Enjoy your generated image creations! 😎</li></ol><h1 id="navigation">Navigation</h1>The workflow is structured for flexibility. Many unconnected nodes have intentionally been included to provide options and ideas for endless tweaking. (The workflow does not employ Anything Everywhere, so if a node connection looks empty, it really is empty.)In the Switchboard group, flip the yes|no 🔵 toggles to mute or unmute groups and the jump arrows ➡️ to quickly move to particular groups for adjustments. 🛑 Do NOT run the workflow with all switches flipped to yes! —except in the Core edition.<img src="https://image.civitai.com/xG1nkqKTMzGDvpLrqFT7WA/b958bb7c-568c-49fa-80c1-da6b5193ad23/original=true/b958bb7c-568c-49fa-80c1-da6b5193ad23.jpeg" />In the main workflow, once you have the main diffusion model, CLIP, VAE, and LoRAs in their correct working locations for your setup, you can ignore any additional missing model errors. If the scary red boxes bother you, in the Comfy &gt; Workflow section of the settings, turn off Show missing models warning. (Alternatively, almost all of the problematic groups/subgraphs can just be deleted and the default workflow recipes should still work.)<img src="https://image.civitai.com/xG1nkqKTMzGDvpLrqFT7WA/0a0c317c-1815-4972-9368-6e105135e876/original=true/0a0c317c-1815-4972-9368-6e105135e876.jpeg" />In the <a target="_blank" rel="ugc" href="https://github.com/rgthree/rgthree-comfy">rgthree</a> settings, it is also recommended to show fast toggles in group headers for muting.<img src="https://image.civitai.com/xG1nkqKTMzGDvpLrqFT7WA/e6630b78-071d-4b81-9d1c-9a02a24f585b/width=525/e6630b78-071d-4b81-9d1c-9a02a24f585b.jpeg" />In the Lite Graph section of the settings, enable the fast-zoom shortcut and set the zoom speed to around 1.5–1.75. The workflow was built with a snap to grid size of 20.<img src="https://image.civitai.com/xG1nkqKTMzGDvpLrqFT7WA/00b3af8e-a1fd-4ac2-bfad-b6e2b177d999/width=525/00b3af8e-a1fd-4ac2-bfad-b6e2b177d999.jpeg" />Most of the workflow is unpinned 📌, so grab any empty space with your mouse to navigate around. You are welcome to pin 📌 anything you like to prevent accidentally moving groups or nodes.<h1 id="recipes">Recipes</h1>Run the default text-to-image recipe 🥣 to ensure you have the basics configured correctly before too much tweaking. Once you have the workflow running, drag-and-drop your rendered image back onto the ComfyUI canvas to continue working. This ensures you will always have a good default workflow as fallback. 🏅The workflow is heavily annotated 🗒️ and includes a number of pre-configured samples 📦 for you to learn and build!

💪 UniFlex ⁘ 🔮 Krea 2 (((AIO)))  [BG Removal/SAM, ControlNet, LLM, Wildcards, Upscaling, +++]

Files with SHA256: 1992c0f7a2551ee26c0caab1eeb741ce6b69085405f8975dc57050433c7f1431