If you ran into any troubles with my mix, please read description below. There is plenty of useful information. Also, you can contact me through message system on CivitAI.Если вы столкнулись с каким-либо проблемами при использовании моего микса, пожалуйста, прочитайте описание ниже. Там есть много полезной информации. Так же вы можете связаться со мной через чат на CivitAI.Also try: <a target="_blank" rel="ugc" href="https://civarchive.com/models/6174/divineelegancemix">DivineEleganceMix!</a><hr />Introduction:DivineAnimeMix, obviously, more anime-styled version of DivineEleganceMix, that was inspired by more clean and straight-forward anime style. It's still keeps some details of original mix, but also has it's own more unique and anime-ish visuals.<ul><li>Clean and sharp anime style</li><li>Less post-processing in generations</li><li>Great prompt guidance</li><li>Great character and concept recognition level</li><li>Great LoRA (nai/any-based) compatibility</li></ul>I hope you also will like DivineAnime, so stay tuned for newer versions of mix!<hr />Recommendations:<ul><li>Use danbooru tagging for prompts</li><li>Sampler: "Euler a" at 30 steps</li><li>Cfg scale: 8</li><li>Clip Skip: 2 &lt;---- VERY IMPORTANT</li><li>ENSD (Eta noise seed delta) - leave blank</li><li><a target="_blank" rel="ugc" href="https://huggingface.co/hakurei/waifu-diffusion-v1-4/blob/main/vae/kl-f8-anime2.ckpt">kl-f8-anime2 VAE</a></li></ul>Recommendations (Hires Fix):<ul><li>Upscaler: <a target="_blank" rel="ugc" href="https://huggingface.co/Akumetsu971/SD_Anime_Futuristic_Armor/blob/main/4x_fatal_Anime_500000_G.pth">Fatal Anime</a></li><li>Upscaler: R-ESRGAN 4x+ Anime6B (basic)</li><li>Hires steps: 10 (Euler a)</li><li>Hires steps: 15 (other samplers)</li><li>Denoising strength: 0.3 (Euler a)</li><li>Denoising strength: 0.4 (other samplers)</li><li>Upscale by: any</li></ul><hr />Troubleshoot:My colored are bleached out. What should i do?<ul><li>You're missing a VAE file. For this mix i would recommend kl-f8-anime2 VAE. Just put it into SD folder -&gt; models -&gt; VAE folder. Then go to your WebUI, Settings -&gt; Stable Diffusion on the left list -&gt; SD VAE, choose your downloaded VAE.</li></ul>If you want to get mostly the same results, you definitely will need negative embedding:<ul><li><a target="_blank" rel="ugc" href="https://civarchive.com/models/7808/easynegative">EasyNegative</a>, it's better to use it at 0.8 weight.</li></ul>Don't use EasyNegative (or other embeddings) with Style LoRAs, it may ruin the style!<ul><li>Until you like the result, of course.</li></ul>Don't use a lot negative embeddings at the same time. It definitely will ruin any possible output on all models! If you want to use negative embeddings - use one for quality, and one for hands (if you want a placebo for hands).<hr />Technical support:If you're ran into any problem with my mix, you can DM me on discord:troubledarkness - discord nickname.I'll be glad to help | Буду рад помочь.<hr />Credits:Really BIG thanks to:<ul><li>andite for <a target="_blank" rel="ugc" href="https://huggingface.co/andite/yohan-diffusion/blob/main/Cocoa.ckpt">Cocoa</a></li><li>Linaqruf for original Anything model</li><li>You, for reading, downloading and reviewing this mix</li></ul>

DivineAnimeMix

It was a long time since first version release, so, lets start. Version changes:Global:<ul><li>Changed merging weights</li><li>Removed Cocoa from the mix</li><li>Now models has more clean anime look</li></ul>Characters:<ul><li>Bigger, better and more deep eyes</li><li>Smaller torsos in overall</li><li>Easier-to-prompt face expressions</li><li>More reactive bodyshape prompts "curvy", "skinny" etc.</li></ul>Environment:<ul><li>More control over fog and blur</li><li>Now fog can be removed with "fog" and "mist" tags in negatives</li><li>More blur for backgrounds, can be turned off with "blurry" in negatives</li></ul> With this version of DivineAnime all your LoRAs should work as good as on previous version, so, there is no any problems with compatibility.<ul><li>But can do bigger eyes on some style LoRAs</li></ul>Thanks for keeping an eye on Divine series models and thanks for reading this changes, i hope you'll like new version of DivineAnimeMix as well.

divineanimemix_V2.safetensors

Divine Anime Mix

DivineAnimeMix v2

DivineAnimeMix v1

If you ran into any troubles with my mix, please read description below. There is plenty of useful information.Also try: DivineEleganceMixIntroduction:DivineAnimeMix, obviously, more anime-styled version of DivineEleganceMix, that was inspired by more clean and straight-forward anime style. It's still keeps some details of original mix, but also has it's own more unique and anime-ish visuals.<ul><li>Clean and sharp anime style</li><li>Less post-processing in generations</li><li>Great prompt guidance</li><li>Great character and concept recognition level</li><li>Great LoRA (nai/any-based) compatibility</li></ul>I hope you also will like DivineAnime, so stay tuned for newer versions of mix!Recommendations:<ul><li>Use danbooru tagging for prompts</li><li>Sampler: "Euler a" at 30 steps</li><li>Cfg scale: 8</li><li>Clip Skip: 2 &lt;---- VERY IMPORTANT</li><li>ENSD (Eta noise seed delta) - leave blank</li><li>kl-f8-anime2 VAE</li></ul>Recommendations (Hires Fix):<ul><li>Upscaler: Fatal Anime</li><li>Upscaler: R-ESRGAN 4x+ Anime6B (basic)</li><li>Hires steps: 10 (Euler a)</li><li>Hires steps: 15 (other samplers)</li><li>Denoising strength: 0.3 (Euler a)</li><li>Denoising strength: 0.4 (other samplers)</li><li>Upscale by: any</li></ul>Troubleshoot:My colored are bleached out. What should i do?<ul><li>You're missing a VAE file. For this mix i would recommend kl-f8-anime2 VAE. Just put it into SD folder -&gt; models -&gt; VAE folder. Then go to your WebUI, Settings -&gt; Stable Diffusion on the left list -&gt; SD VAE, choose your downloaded VAE.</li></ul>If you want to get mostly the same results, you definitely will need negative embedding:<ul><li>EasyNegative, it's better to use it at 0.8 weight.</li></ul>Don't use EasyNegative (or other embeddings) with Style LoRAs, it may ruin the style!<ul><li>Until you like the result, of course.</li></ul>Technical support:If you're ran into any problem with my mix, you can DM me on discord:troubledarkness - discord nickname.I'll be glad to help | Буду рад помочь.Credits:Really BIG thanks to:<ul><li>andite for Cocoa</li><li>Linaqruf for original Anything model</li><li>You, for reading, downloading and reviewing this mix</li></ul>

Version changes:

1. Global:
- Changed merging weights
- Removed Cocoa from the mix
- Now models has more clean anime look

2. Characters:
- Bigger, better and more deep eyes
- Smaller torsos in overall
- Easier-to-prompt face expressions
- More reactive bodyshape prompts "curvy", "skinny" etc.

3. Environment:
-More control over fog and blur
-Now fog can be removed with "fog" and "mist" tags in negatives
-More blur for backgrounds, can be turned off with "blurry" in negatives

With this version of DivineAnime all your LoRAs should work as good as on previous version, so, there is no any problems with compatibility.
- But can do bigger eyes on some style LoRAs

Thanks for keeping an eye on Divine series models and thanks for reading this changes, i hope you'll like new version of DivineAnimeMix as well.

Files with SHA256: 21e8ae2ff36585273e0df68559eb51344276399fb193ab199248d7ab044e1d65