Hand Tie Clips 1.1.0 UPDATE The fix worth updating for: a reference pinned to a later hop tended to be rendered as the shot. The line that tells the encoder what a picture is for was only emitted on hop 1, so a still scheduled onto hop 3 arrived uncited — and a wardrobe plate could be announced as the character's face. Fixed. - The panel is four tabs now — Script / Refs / Media / Write — with RUN pinned below, instead of one long scrolling column. The Write draft is readable; it used to clip every beat at 110 characters. - lock and a render range on each shot card. Freeze a take you like and re-render only the hops around it. - Correct resolutions. H3 is a 768-short-edge model, so the top rung at 16:9 is 1344×768 — the size MiniMax states as native. Eleven aspect ratios across five tiers. - Reference clips take a description, plus a video input size so a 4K plate isn't decoded at full resolution just to be scaled down. - Changing one reference re-renders only the hops it rides, not the chain. One node. Write a shot plan, drop in your reference stills, queue once.Hand Tie Clips renders a multi-hop MiniMax H3 Reference-to-Video chain withaudio. Each hop is one continuous clip, and consecutive hops are joined bypinning the previous hop's final frames and audio tail into the next hop'sconditioning — so a 30-second scene comes out of one queue instead of sixmanual runs stitched together in an editor.<hr /># Read this before you download #This workflow ships the turbo stack — the LoRA loader, the AdaLN fix, sparseattention and the low-VRAM path. That stack is why it runs at 4–8 steps insteadof 14, and it means the graph needs three node packs, not one. Without themit opens with red missing-node boxes.<hr />### Node packs ###| [ComfyUI-Hand-Tie-Clips](<a target="_blank" rel="ugc" href="https://github.com/dntpi/ComfyUI-Hand-Tie-Clips">https://github.com/dntpi/ComfyUI-Hand-Tie-Clips</a>) | this workflow's node — the chain, the seam report, the chain preview || [ComfyUI-PlagueKind-Nodes](<a target="_blank" rel="ugc" href="https://github.com/PlagueKind/ComfyUI-PlagueKind-Nodes">https://github.com/PlagueKind/ComfyUI-PlagueKind-Nodes</a>) | the turbo LoRA loader, AdaLN LoRA fix, sparse attention || [ComfyUI-KJNodes](<a target="_blank" rel="ugc" href="https://github.com/kijai/ComfyUI-KJNodes">https://github.com/kijai/ComfyUI-KJNodes</a>) | low-VRAM attention, latent preview override || [ComfyUI-H3-Motion-Context](<a target="_blank" rel="ugc" href="https://github.com/NikoDemon80/ComfyUI-H3-Motion-Context">https://github.com/NikoDemon80/ComfyUI-H3-Motion-Context</a>) | optional but recommended. Hops after the first are guided by the previous hop's sampler latent through it. Without it the node falls back to stock <code>MiniMaxH3AddGuide</code> — still works, still chains, different join. |<hr />Install Hand Tie Clips itself with:cd ComfyUI/custom_nodesgit clone <a target="_blank" rel="ugc" href="https://github.com/dntpi/ComfyUI-Hand-Tie-Clips.git">https://github.com/dntpi/ComfyUI-Hand-Tie-Clips.git</a>Then restart ComfyUI and hard-refresh the browser (Ctrl+Shift+R). A stalebrowser cache is the single most common reason the node mounts with no UI.There are no Python dependencies to install — everything it imports alreadyships with ComfyUI. A zip is attached for anyone who would rather not clone,but <code>git clone</code> is the better path: updating later is just <code>git pull</code>.<hr />### Models ###These are the filenames my loaders point at. **If your H3 weights are nameddifferently, just repoint the loaders** — nothing here is hardcoded.UNET minimax_h3_hybrid_fl2va_ref2va_b30-49-int8.safetensorsCLIP qwen3vl_32b_minimax_h3_int8_convrot.safetensors (type: minimax)VAE minimax_h3_video_vae_int8_convrot.safetensorsVAE minimax_h3_audio_vae_fp32.safetensorsLoRA minimax_h3_ref2v_turbo_4step_v0.1_comfyui_bf16.safetensorsTAE taeh3.safetensors (preview only)You need a ref2va or hybrid ref2va checkpoint — plain fl2va has noreference rows and will not work.<hr />## What it's for##- Scenes longer than a single H3 generation- Keeping a character's face, wardrobe and voice consistent across hops- Re-rolling one hop without re-rendering the rest<hr />## What's in it ##| <code>shot_plan</code> | your script as JSON — one shot per hop, so the shot count is the hop count || <code>directives</code> | join / camera / framing / pace / tail per shot, compiled to vetted prose || <code>ref_plan</code> | stable <code>@tags</code> for reference stills, grouped into subjects || <code>cache_hops</code> | lossless per-hop cache — edit hop 5 of 8 and only 5–8 re-render || seam report | measures the brightness step at every join, in /255 || tone compensation | corrects cumulative brightness drift across a long chain |## Getting startedOnce the packs above are installed, open the attached<code>HandTieClips_Starter.json</code>. It ships with no reference images on purpose,so it runs before you've supplied any pictures. The canvas carries its owndocumentation as note cards.<code>prompt_pack/</code> in the pack folder turns any chat model into a plan writer: paste<code>SYSTEM_PROMPT.md</code> into LM Studio's system prompt box, describe your scene inplain language, and paste the two JSON blocks it returns straight into the node.## Honest limits- Built and tuned for the turbo regime — 4 to 8 steps, not 14.- A 5-second hop drops the airlock on a continuous join. Validate seams at 8s or 15s.- Written for MiniMax H3 specifically. It is not a general video-chaining tool.Full docs, prompting guide and engineering log:<a target="_blank" rel="ugc" href="https://github.com/dntpi/ComfyUI-Hand-Tie-Clips">https://github.com/dntpi/ComfyUI-Hand-Tie-Clips</a> <hr />## Writing the plan (optional, but this is the good part)##<code>shot_plan</code> and <code>ref_plan</code> are ordinary JSON, so you can type them yourself andthe node will tell you exactly what it doesn't like. But the pack ships<code>prompt_pack/</code> to turn any decent chat model into a plan writer:1. Open LM Studio (or any local/hosted chat model), paste the contents of<code>prompt_pack/SYSTEM_PROMPT.md</code> into the system prompt box.2. Describe your scene in plain language — *"three 10-second clips, a cook in akitchen, she finishes plating and walks out into the hallway."*3. Paste the two JSON blocks it returns straight into the node.It's worth doing even if you're comfortable with the JSON. The format has tworules that are easy to get wrong by hand and annoying to debug: a reference<code>@tag</code> has to match its register entry character for character, and beats mustdescribe what is happening rather than what stops happening — H3 renders thenegation. The prompt doc encodes both.Tested against Qwen and Gemma-class local models; nothing exotic required.

Hand Tie Clips — multi-hop MiniMax H3 video + audio, one queue

V1.1 Hand Tie Clips 1.1.0 The fix worth updating for: a reference pinned to a later hop tended to be rendered as the shot. The line that tells the encoder what a picture is for was only emitted on hop 1, so a still scheduled onto hop 3 arrived uncited — and a wardrobe plate could be announced as the character's face. Fixed. - The panel is four tabs now — Script / Refs / Media / Write — with RUN pinned below, instead of one long scrolling column. The Write draft is readable; it used to clip every beat at 110 characters. - lock and a render range on each shot card. Freeze a take you like and re-render only the hops around it. - Correct resolutions. H3 is a 768-short-edge model, so the top rung at 16:9 is 1344×768 — the size MiniMax states as native. Eleven aspect ratios across five tiers.- Reference clips take a description, plus a video input size so a 4K plate isn't decoded at full resolution just to be scaled down.- Changing one reference re-renders only the hops it rides, not the chain. V1.01 SMALL BUGFIXES, UPDATE TO 1.01 IF YOU HAVEN'T. (mostly to do with the LM integration and some reference file duplication in the input folder) Hand Tie Clips v1.0 — talking video that keeps going past one clip.MiniMax H3 gives you one short clip with sound. This node chains several into one continuous take — same face, same room, dialogue carrying across the joins — from a single queue.▎ New in 1.0LM Studio integrationYou don't have to write the plan. Describe your scene in a sentence, press Write plan, and it fills in the script and your reference settings, reading the photos you've dropped in rather than guessing from filenames. Treat it as a good first draft — worth a read before you queue, and much faster than starting cold.Soundtrack inputA music bed. Drop in a track and it sits under the whole chain, ducking automatically under the dialogue. Loop or play once, with fades.Trim bars on every audio and video input. Drag to choose the section you want. This one matters: H3 encodes your whole voice file no matter how long it is, so a three-minute take is a tax on every second of every clip.The writer model stays warm between plans and is evicted the moment you queue a render, so it doesn't compete with the sampler for VRAM.Also fixed: no more invented dialogue over the opening seconds of a clip, non-English lines timed correctly, and reference images keeping the size you set.Search Hand Tie Clips in ComfyUI Manager.

Files with SHA256: f12a792c9e09ea7d67cf8a0feb6c8e3a7164a461ea24fecba234eb7f0e609135