CivArchive

    This Lora is made to enhance the ability / quality to create anthro and furry

    but it works also for all kind of other fantasy creatures and animals too

    the range that it can handle for example the Wan 2.2 V2 Lora is from comic and drawing towards real photos .

    i made the lora for Hunyuan Video , WAN 2.1 and 2.2 (SFW and NSFW)

    Furry Enhancer Hunyuan V1

    The Hunyuan Video version is trained for Text to Video (T2V) but i also tested it on Image to Video its also working with it very good but not made for that.

    All example images for the Hunyuan Video are made T2V

    Its also compatible with Ratatoskr Hunyuan

    Wan 2.1 I2v and T2V V1

    The Wan 2.1 has 2 different models

    I2V and T2V

    the image to video is in most cases the model of choice for Wan

    for the Text to Video Variant please read the description.

    Its also compatible Ratatoskr WAN 2.1 (ITV) and will for sure increase the quality especially in the NSFW Area.

    I also tested the I2V Lora with Wan 2.2 it seems to enhance the result too but very experimental

    Wan 2.2 I2V and T2V V1

    This enhancer version is for Wan 2.2 its splitted in basically 2 Loras: low and high noise

    both loras for I2V are trained on the same dataset. I its my own dataset before i trained with the wan 2.1 Lora but add more pictures and videos

    it's completely synthetic so no real persons or art is used for the dataset.

    whats the pros of this lora compared to the wan 2.1?

    • more consistent

    • more specimen

    better in sfw and nsfw

    i recommend using both loras and use the workflow in the training folder Note: your resolution needed to set between 0.4 (480P) and 0.92 (720p) overwise the lora generate backscreens or other failures.

    for strength i prefer the full 1.0 strength its tested

    its tested with the original wan 2.2 model

    also in a short test with my Ratatoskr WAN 2.2 Hybrid v1.0 WIP model (use only the high noise version with that model)

    for technical data about Wan 2.2 visit there official site here:

    V2 Furry Enhancer High Noise

    Changes compared to V1

    • more consistent

    • more specimen

    • better overall movements

    • more stable overall

    • way better with comic and anime than V1

    better in sfw and nsfw

    i recommend using the V1 Version of the WAN 2.2 I2V V1.0Low Noise

    Note: I used for example the old workflow for this model to compare V1 with V1 if you like the newest workflow download the training folder.

    Important for this workflow is to keep the resolution between 0.4 and 0.92 (480p - 720p)

    V3 High Noise and Low Noise

    This enhancer version is for Wan 2.2

    its trained my own dataset

    it's completely synthetic so no real persons or art is used for the dataset.

    the biggest change in this dataset is its now completely trained on videos

    Changes compared to V2

    • trained now on over 650 Videos

    • better overall movements

    • more emotions

    • way better with comic and anime than V1 and V2

    better in sfw and nsfw

    for this Version there is also an newtrained Low Noise Model

    LTX2.3 Version (WIP Preview V0.1)

    this is an preview version of the first attempt to train the ltx 2.3 model with a very limited dataset

    so it's more like an technical demonstration / trial than a fully trained lora.

    So don't expect best results yet it's highly experimental.

    for workflow i have also added an experimental workflow.

    LTX2.3 Version V1 Lora Pack

    This is the First full Release Version of the LTX Version of Furry Enhancer Video.

    Better to say it's an model pack because

    V1.1 is made based on ltx 2.0 training setup so best for the LTX 2.0 model

    V1.215 its the main model trained specifically for the ltx 2.3 Version so start usually with that lora

    V1.22 More advanced in training but has sound issues.

    V1.3 experimental (wip) model trained in different training modes (heavy sound issues)

    you find the used workflows and the different model versions in the "training folder"

    the loras are tested on the dev version and the distilled variant.

    what has changed to preview?

    • Trained on the full video database (V1.2 and up) at around 700 videos instead of only 40 videos

    • Also trained on my photo database of ratatoskr overall over 10k pictures

    • Trained for i2v and t2v

    • better overall knowledge and movement .

    Note: this is still in development because most of the trained videos are based on my wan2.2 database so its planned to train an v2 this year with video output of that model.

    also i don't have my own workflow done yet so it depends on other workflow don by afroman4peace and akinson

    LTX2.3 Version V2.4

    I have decided to retrain the dataset on a far advanced system now its trained on a server with an rtx6000 pro blackwell for more than a week 24/7 (and yes this was expensive)

    so what has changed from V1 to V2.4?

    • the trained video resolution is now at 720P constant

    • image training did improved from 1024p to 1536p

    • added 120 new sound videos for training especially for speech and jaw movements.

    • seperated videos with sound and not sound and trained in different databases

    • trained for T2V and I2V in stages so its nearly equally trained for both now

    • added new pictures to database too but more important overworked the captions fitting better for video training

    For settings and workflow i have added my example videos in the training folder the images and some videos has the metadata just put them into comfy

    on my workflows was the loral at best between 0.8 and 1.0

    the lora is trained on the dev model but also tested for the distilled version

    for now still don't have my own workflow done yet so it depends on other workflow don by afroman4peace and akinson

    please support my work with an like and look on my other loras and models too

    the newest workflow download the training folder.

    in all videos the metadata is also included just download the video and put it into Comfy

    Important for this workflow is to keep the resolution between 0.4 and 0.92 (480p - 720p)

    if you like to support me please give a like and Check out my other models.

    Making such loras take a huge amount of cost and time please support my work with a like.

    and please check out my other models and loras too ;-)

    made by freek22

    Description

    High Noise Lora V3

    This enhancer version is for Wan 2.2

    its trained my own dataset

    it's completely synthetic so no real persons or art is used for the dataset.

    the biggest change in this dataset is its now completely trained on videos

    Changes compared to V2

    • trained now on over 650 Videos

    • better overall movements

    • more emotions

    • way better with comic and anime than V1 and V2

    better in sfw and nsfw

    for this Version there is also an newtrained Low Noise Model

    Note: I used for example the old workflow for this model to compare V3 with V2 if you like the newest workflow download the training folder.

    in all videos the metadata is also included just download the video and put it into Comfy

    Important for this workflow is to keep the resolution between 0.4 and 0.92 (480p - 720p)

    if you like to support me please give a like and Check out my other models.

    FAQ

    Comments (31)

    NoMarzipan8994381Sep 21, 2025
    CivitAI

    Are there specific loras for Anthro besides Furry?

    freek22
    Author
    Sep 21, 2025

    Hi this Lora is for both with a tendency for anthro for example see the wizard cat😁😉👍

    hedgehedSep 26, 2025
    CivitAI

    Hi! Your json workflow furry enhancer Video V3 Cascade (for longer Videos).json contains a link to
    Furry Enhancer Wan2.2 V3 Low Noise I2V .safetensors But this file is not in the download section. Please tell me how to download it, or maybe the JSON itself is outdated?

    hedgehedSep 26, 2025

    I found some files by clicking on the chain of links above, but I can't find these three:
    Wan2.2-Lightning_I2V-A14B-4steps-lora_HIGH_fp16.safetensors,
    Wan2.2-Lightning_I2V-A14B-4steps-lora_LOW_fp16.safetensors,
    WAN2.2Vore I2V.safetensors,

    freek22
    Author
    Sep 26, 2025

    The first 2 are wan2.2 lightning https://huggingface.co/lightx2v/Wan2.2-Lightning

    Lora the last one is a non public test lora you don't need it for the workflow

    freek22
    Author
    Sep 26, 2025

    The v3 low noise is in the download section

    eskirregul649Sep 30, 2025
    CivitAI

    No longer works for on-site generation, had a few good results a few weeks ago but now it's just orange/static or a blurry mess, regardless of version or strength used

    freek22
    Author
    Sep 30, 2025

    seem is civit site generator related

    eskirregul649Sep 30, 2025· 1 reaction

    @freek22 many thanks, I'll give it a try. I'm assuming the WAN models on here had some changes since 2.5 released

    freek22
    Author
    Sep 30, 2025· 1 reaction

    @eskirregul649 asked them in discord lets see if i get a answer soon

    parkera479Oct 2, 2025
    CivitAI

    Hi, I am currently having issues with both the high and low noise 3.0 lora versions. I am not sure what I may be doing wrong, as the output videos have an orange tint to them after the first two seconds. I'm using the provided workflow, and have not changed anything. Lora is set to 1 as stated to use. I have tried lowering the strength, however that does not stop the orange tint. If anyone has encountered this issue and may have a fix, let me know. Thanks.

    freek22
    Author
    Oct 3, 2025

    This is very strange maybe comfy changed some things the same happens with the online generator on civit did you used the newest workflow If it's V1 the problem is known use the newest and keep resolution over 0.4 (480p) can't test the issue because Iam right now in hospital

    parkera479Oct 3, 2025· 1 reaction

    Hi @freek22, I was able to get the issue resolved with Comfy. It seems that at least for me when I dragged and dropped the newest workflow into comfy (fresh install of comfy and latest version), the lora loader breaks for some unknown reason. deleting the lora loader and then replacing it with a new one fixed the issue. I am unsure if it is on my end, or maybe an existing issue with comfy? Nonetheless, this has fixed the issue. Thank you for responding to my message, and I hope that you get better.

    freek22
    Author
    Oct 3, 2025

    @parkera479 it may a comfy general problem I will look into that issue when I am back home and thank you for your blessings

    slavicsparky908Feb 20, 2026

    @freek22 To me it is still happening but idk why, i can show you resoults, and can even give you a workflow

    door_zekorOct 30, 2025
    CivitAI

    Great, how ever I haven't gotten it to do knotting and it doesn't quite understand knotted penises in general.If anyone has a way to get that working let me know.

    freek22
    Author
    Oct 31, 2025

    To model itself can't indeed do knotted penises may be adding another lora

    door_zekorOct 31, 2025

    @freek22 That's fine, I'm trying a 2.1 wan furry lora to see if that can do it or help with that.
    Hopefully someone makes a lora that specialists in that.
    It still did okay with it, I just could tell it didn't really get what it should be doing.

    VeracorJan 14, 2026

    @freek22 Yes, please include more genital references! Knots in particular are so hard for Wan to figure out.

    kronos1959777Nov 29, 2025
    CivitAI

    The motion is actually better with your checkpoint as well. but the background dissolves into a single colour (red usually) very quickly.

    VinibloDec 10, 2025
    CivitAI

    Why do you make a "furry" lora but obviously avoid putting that tag?

    freek22
    Author
    Dec 10, 2025

    because if you give that tag your visibility overall of the lora will go down because the civit filters

    awooDec 20, 2025
    CivitAI

    With the V3 2.2 workflow provided, I find my videos shift to warmer colors/more yellow over time. I'm very new to Wan, is there an easy way I can correct for this in Comfy?

    AnnoyedDragonJan 26, 2026
    CivitAI

    Any plans to port to LTX-2? It seems to struggle with unconventional non-human characters the moment they start moving around; in ways WAN didn't, which could be attributed to this.

    freek22
    Author
    Jan 27, 2026· 2 reactions

    It's actually planned when I have more time currently iam working on a new qwen image update after that I may have time

    AnnoyedDragonJan 27, 2026

    @freek22 Great to hear ^.=.^ I'll look forward to it.

    ironeinsteinFeb 23, 2026

    Definitely looking forward to an LTX-2 version of this!

    freek22
    Author
    Apr 9, 2026· 1 reaction

    So an ltx2.3 version is released

    AnnoyedDragonApr 9, 2026

    @freek22 Thank you so much! LTX has clearly needed some good anthro/animal training data, even with the preview I saw improvements in characters being able to move around without falling apart like before. It's a great contribution to the furry AI scene ^.=.^

    freek22
    Author
    Apr 9, 2026· 1 reaction

    @AnnoyedDragon thanks to hear that and this is just V1 that is more or less in beta state its planned to use that lora to generate better video than the current dataset and train that again on V2 i also wait for people that send me the best output that they wanna share so i can use that too...