CivArchive

    This Lora is trained on the WAN 2.2 I2V 14B low and high noise models and can be used to generate facial cumshots. It works with or without a man present in the initial image.

    Update 20/07 - LTX 2.3 Experimental version

    On request of some members here, I took my Wan dataset and tried training a LTX 2.3 lora with it.

    To be honest LTX 2.3 doesn't seem to understand fluids as well as Wan and there are alot of different workflows and loras and configurations you can tinker with in LTX, that I really don't have the patience for at the moment.

    So the Lora is here in case anyone wants to try it out but yeah....

    This was trained without audio by the way.

    Update 09/07 - V3 out

    This is not a big upgrade here but it brings some small improvements. The twin jets can now be seen more often and the cum stream themselves should be move visible in flight. Previously sometimes it was just too fast.

    You can try this to control things a bit:

    the cum comes out in (thick|thin) jets

    the cum comes out in (thick|thin) spurts

    the cum comes out in varying thin jets and thick spurts

    Update 07/01 - Alt V2 out

    Happy new year everyone! Hope you are all having a nice start of the year!

    After some more testing, I decided to also put here a High/Low alt version of the V2, which seems to give better results in some situations. I think it's mostly in more zoomed in shots but could help in other cases as well. If there's something you are trying with the normal V2 and you think it could work a bit better, try out the alt version then.

    Update 01/12 - New version out

    Not everything I was going for worked out with this version, I need to tweak the dataset a bit a train again but I was anyway happy with the results and decided to share it.

    Some concepts are not quite there and there's quite often alot of cum but... Enjoy!

    Please check the Training Data zip attached to the High version for all the captions used in the training. Videos have the workflow attached.

    Update 02/10 - Attached workflow file (to the high version)

    Trigger Phrases (some work better than others, the least tested ones are highlighted below):

    a woman is kneeling in front of a man

    a woman is lying down on her back and the man is on top of her

    a woman is kneeling in front of two men

    cum shoots out of their penises and lands on her face and eyes

    (cum shoots out of the penis and lands on her tongue)

    cum shoots out of the penis and lands on her face and her eyes and her mouth

    (cum shoots out of the penis and lands on her face and her mouth)

    cum shoots out of the penis and into her mouth and tongue

    big cum load

    (high speed cumshot)

    (thick cum load)

    (cum strings)

    she has her mouth open

    she has her mouth open and her tongue out

    she has her mouth and eyes closed

    (she nervously smiles)

    (she smiles)

    (she flinches)

    she frowns, she hates cum

    she hates cum

    the man strokes his penis back and forth with his hand

    the men are stroking their penises back and forth with their hands

    the woman strokes his penis back and forth with her hand

    the view is from above

    the view is from the side

    big close-up

    close-up

    Works pretty ok with 6 steps and Wan21_I2V_14B_lightx2v_cfg_step_distill_lora_rank64.safetensors at strength 3 (high) and 1.5 (low).

    CFG 1 - Euler Ancestral

    Description

    Check notes of High version

    FAQ

    Comments (55)

    lighthorsexajz830Sep 16, 2025
    CivitAI

    Thank you I'll test to see what it's going to give thank you for your share ha I have a question with what software you do this lora wan 2.2?

    Civitaiwolfxx
    Author
    Sep 16, 2025· 4 reactions

    I trained it with the Musubi tuner

    lighthorsexajz830Dec 3, 2025· 3 reactions

    @Civitaiwolfxx thank you for your return again you have done a good job you are the best currently on the las style with ejaculation the rendering is really amazing

    Civitaiwolfxx
    Author
    Dec 3, 2025

    thanks man, appreciate it

    Baka_OppaiSep 16, 2025
    CivitAI

    no files?

    Civitaiwolfxx
    Author
    Sep 16, 2025

    Sorry, was splitting it into two files instead of a single zip and ran into some issues. should be fine now

    falo08397Sep 16, 2025
    CivitAI

    i downloaded this early today and has been working well for me. has there been any changes made? do i need to re-download?

    Civitaiwolfxx
    Author
    Sep 16, 2025

    Nope, I just changed the way it was uploaded. its exactly the same. Glad to hear its working well!

    JellaiSep 16, 2025· 1 reaction
    CivitAI

    Damn, these are so solid. Wan 2.2 14B really shines when it comes to keeping track of things like facial expressions during other actions.

    9262074Sep 16, 2025· 2 reactions
    CivitAI

    this is going to be lots of fun 😁 ty!

    FLOW0308Sep 16, 2025· 5 reactions
    CivitAI

    The CUM LoRA models are getting ridiculously strong—everyone's results are amazing, and I'm still refining my materials for the next update

    SlowmoeSep 17, 2025· 4 reactions
    CivitAI

    Now this lora gets the texture right!

    Pat3dxSep 20, 2025· 2 reactions
    CivitAI

    Fantastic Lora. The only downside, is, impossible to use it for titfuck. Even at 0.5 there is cum that goes out of her mouth. Even when not mentioned in the prompt:

    cum shoots out of the penis
    If anyone know how to make the guy cum without having cum that land on her face or goes out of her mouth, when doing something else that facial, titfuck, jerking off, etc...When the penis is not directed to her face.
    Let me know, please.

    Civitaiwolfxx
    Author
    Sep 20, 2025· 1 reaction

    Yeah, I guess every video in the training is a facial.. sorry

    Pat3dxSep 20, 2025· 1 reaction

    @Civitaiwolfxx Your Lora is the only one that can produce realistic cum. I really hope you will make another one not for facial :)

    Civitaiwolfxx
    Author
    Sep 20, 2025· 1 reaction

    I can try to look into that :)

    linkzero7535999Oct 4, 2025

    Yes, when I prompt women to stick out their tongues, they already have semen on their tongues before ejaculate 

    sarcasm83334Oct 22, 2025

    @linkzero7535999 They've been busy ;D

    agent_agent794Oct 1, 2025· 2 reactions
    CivitAI

    Can you by any chance provide a workload file, I tried the settings you recommended, i also tried other workloads that work with other loras, but the results are far away from those you get

    Civitaiwolfxx
    Author
    Oct 2, 2025· 1 reaction

    Workflow you mean ? let me check

    Civitaiwolfxx
    Author
    Oct 2, 2025· 1 reaction

    Attached a workflow (as training data)

    agent_agent794Oct 2, 2025

    @Civitaiwolfxx Yeah, workflow, my bad. Thank you!

    Civitaiwolfxx
    Author
    Oct 2, 2025

    @agent_agent794 did it work for you ?

    agent_agent794Oct 2, 2025

    @Civitaiwolfxx I'm waiting for my current Que to finish generating. After that I will get the nodes I need, restart comfy and test the workflow. But sure as hell I hope it works considering that from the pomo videos it's clear you have done an amazing job training it, a lot more realistic than other cum loras i saw.

    agent_agent794Oct 2, 2025

    @Civitaiwolfxx I have a question. I have to download the unet models.

    you say: Download the required 14B_Q4_K_M.gguf models and save them in your unet path (download the exact same filnames as you see in the "Unet Loaders"):

    You mentioned Q4, but the file names in the unet loaders are Q8. Which one should i get considering I'm running a 4090 and 64GB of ram.

    Civitaiwolfxx
    Author
    Oct 2, 2025· 1 reaction

    @agent_agent794 well, I didn't make the workflow or add those notes there. I just gave you the workflow i'm using. with a 4090 you can use the Q8 of course or probably even the non-quantized version. I have a 5070 and use the Q8 without any issues

    agent_agent794Oct 2, 2025· 1 reaction

    @Civitaiwolfxx Well, it didn't work. The output is very hazy, the chick is opening her mouth but no cum/cock/man to be seen. I even tried with an image that has cock already close to her face. The res is 720, 5 seconds long. I tried 3 different images, all have the same result. Any idea what should i check/adjust?

    Civitaiwolfxx
    Author
    Oct 2, 2025· 1 reaction

    @agent_agent794 do you have all the components from that workflow, the lightx lora etc ? that workflow was taken from other generations 1-1 so it should definitely work

    agent_agent794Oct 2, 2025

    @Civitaiwolfxx yep that was it, i had them but in the workflow they had 00005 or something at the end that i didn't have in my names, once i removed it it works perfectly. Thank you!

    Civitaiwolfxx
    Author
    Oct 2, 2025

    @agent_agent794 glad to hear !

    Civitaiwolfxx
    Author
    Oct 5, 2025

    @javbukkake i renamed the files before submitting them here but the workflow I posted had my original file names. should be fine

    linkzero7535999Oct 4, 2025· 1 reaction
    CivitAI

    To be honest, the semen texture of this lora is not as good as the other LORAhttps://civitai.com/models/1922973/f4c3spl4sh-cumshot-i2v-wan-22-video-lora-k3nk,But this LORA action seems to be easier to control, and it can be achieved with a simple prompt.

    Civitaiwolfxx
    Author
    Oct 4, 2025· 3 reactions

    Well, maybe its up to personal taste in the end. The one you mentioned comes across as not that great to my eyes but anyway, thanks for trying it out :)

    linkzero7535999Oct 4, 2025· 1 reaction

    @Civitaiwolfxx Forgive me, I'm just trying something new, like coping with various styles of images with some fixed-format prompts, I found that your LORA allows the character to maintain facial consistency instead of adding something unwanted like eyelashes or something, thanks for your work, it's still a good LORA, thanks for your hard work. 

    Civitaiwolfxx
    Author
    Oct 4, 2025

    @linkzero7535999 no worries and thanks :)

    jevusOct 8, 2025· 1 reaction

    both works great together. This has more control over the prompt than f4c3 and with f4c3 you control the amount

    linkzero7535999Oct 9, 2025

    @jevus Can you share the weights of the two in H/L, thank you 

    fatberg_slimOct 9, 2025· 2 reactions
    CivitAI

    This LoRA alone with the recommended settings and prompts does not give me good results. In fact the cum is thick as paste (not in a good way) and the amount of cum is just enormous (again, not in a good way). Don't know what's wrong here. In combination with other cumshot LoRAs on the other hand this LoRA works pretty well. I love the "she hates cum" reaction. ☺️

    Civitaiwolfxx
    Author
    Oct 9, 2025

    Hey, did you try the workflow I attached here?

    OcupainiOct 15, 2025
    CivitAI

    Tried your workflow but cant get past to the Low Pass, runs out of memory. I tried increasing the blocks to swap but no luck. on a 5070 and still extremely new to this

    BlackForestGypsyOct 15, 2025· 1 reaction

    Go to file -> Export -> this exports your workfile to a save location you picked. you can now feed this into your LLM of choice and troubleshoot. i learned comfy this way in a couple weeks of intensive genning and gooning

    Civitaiwolfxx
    Author
    Oct 16, 2025

    I'm using a 5070 as well and it works for me. How much RAM do you have ?

    semiramisxxvOct 15, 2025· 2 reactions
    CivitAI

    how do you guys achieve high quality video? i'm new to comfyui and wondering to use the img2vid. used the template workflow but the result kept getting blurred. any workaround or i'm missing something? workflow share would much appreciated. thanks.

    Civitaiwolfxx
    Author
    Oct 16, 2025

    Did you have the lightx lora as well there or just mine ?

    sarcasm83334Oct 22, 2025

    If you're not using lightx speed up lora, then you have to increase the iteration steps quite a lot to not get blur.

    If using the lightx speed up loras and get blur or grain, I suggest trying to raise the low-noise lightx weight.

    semiramisxxvOct 23, 2025

    @sarcasm83334 @Civitaiwolfxx thanks for the answer, i managed to fix the issue beforehand and yes it was the lightx lora which i didn't use it before. also i switched to gguf from diffusion model since i'm on low vram.
    another question, so i have generated 720p quality but apparently it was not as close as most of the works that people posted here.
    1) are you guys generating 1080p?
    2) how many steps and cfg you guys are using? and is it on High or Low or Both KSampler?
    3) do you guys start off with low resolution and then upscale the video afterwards? if that's so any recommendation node for upscaling(ignore this if upscale is unnecessary)?

    Civitaiwolfxx
    Author
    Oct 24, 2025

    @semiramisxxv I can say on my end I'm just following the workflow attached, so 720 pixels on the longest side. I guess i can sometimes increase it a bit if the source image for i2v is more rectangular than square. I don't really like how things look upscaled but that's just me.
    Don't know about the other generations

    idreezyNov 5, 2025· 9 reactions
    CivitAI

    Sometimes I forget to remove or bypass this when I'm trying to generate normal stuff, and semen will randomly be flying at the people from off-camera. It's pretty hilarious, lol. Thank you for your work on this, it's awesome. Good work

    Civitaiwolfxx
    Author
    Nov 5, 2025

    thanks man

    skullzy77Nov 9, 2025
    CivitAI

    This is working really well but for some reason as soon as the cum lands on her face it disappears. Not sure why that's happening.

    heylelheosphoros666Nov 10, 2025· 1 reaction

    Prompt that its thick, goopy and sticky. play around with that concept until you start getting results. Should only take a sentence or two.

    idreezyNov 12, 2025· 1 reaction

    I sometimes noticed this, and I added "the semen sticks to her face and accumulates"

    skullzy77Nov 14, 2025· 1 reaction

    @heylelheosphoros666 @idreezy Thanks for the tips it's working great now.

    sarcasm83334Nov 19, 2025· 1 reaction

    I notice the same regarding any cum that goes in the mouth.. really struggling to get any to actually go in the mouth and remain visible there... it's like the tongues have a magic cleaning ability lol.

    I'll try the tips above about accumulating in the mouth or something. I really hope someone's cooking up a "cum in mouth" lora for that specific thing. :) (Not to say I'm unhappy at all with this Lora or any others, the Lora creators are an absolute Godsend!)

    idreezyNov 25, 2025

    @sarcasm83334 There is a Premium Bukkake styled Lora, if you're familiar with their content. It focuses on cumshots in the mouth, but I'm not sure how good it is for the semen staying in the mouth. Maybe you could mess with it and test it?

    LORA
    Wan Video 2.2 I2V-A14B

    Details

    Downloads
    10,534
    Platform
    CivitAI
    Platform Status
    Available
    Created
    9/16/2025
    Updated
    7/26/2026
    Deleted
    -
    Trigger Words:
    cum shoots out of the penis and lands on her face and her eyes and her mouth

    Files

    Wan22_Cum_low_noise_1.V1.safetensors

    Mirrors

    HuggingFace (50 mirrors)