Yu_Glass Light Transmission Enhancement LoRA_SD1.5 This model primarily enhances the effect of seeing interiors through glass in architectural renderings To achieve the best results, use it in combination with other 1.5 series models I've released.
Usage Suggestions
When using, you can appropriately increase the CFG value; 5-9 is a reasonable range.
Choose Euler a as the sampling method, 30 steps can achieve faster speed; to improve quality, you can choose dpm++3m karras and set the sampling steps to around 45.
Try to keep the generated image resolution no lower than 1024x1024, otherwise quality may decrease.
For best results, it's recommended to use this with the 1.5 version base model I've released.
It needs to be used with the matching prompts for the 1.5 base model, and must include "Glass Curtain Wall Structure" and "translucent" to take effect.
The recommended weight is around 0.7. Some of the showcase images are combined with a human viewpoint close-up enhancement LoRA; when used together, the weight should be appropriately reduced.
该模型主要强化了建筑效果图中透过玻璃可以看到室内的效果
配套我发布的其他1.5系列模型使用才能达到最佳效果
使用建议
1.使用时可以适当拉高CFG值，5-9都是合理范围。
2.采样方法选择euler a，30步即可达到较快的速度；如需提高质量，可选择dpm++3m karras，并设置45左右的采样步数。
3.生成图片分辨率尽量不要低于1024x1024，否则可能会出现质量下降的情况。
4.建议搭配我发布的1.5版本大模型使用效果最佳
5.需结合1.5大模型的配套提示词，并且必须出现Glass Curtain Wall Structure及translucent才可生效
6.权重建议为0.7左右，展示图中部分搭配了人视点近景加强lora，搭配使用时应当适当降低权重