CivArchive
    Tap to Screen — MiniMax H3 lip-sync MV on your own song (multi-scene timeline) - v1.3.1

    🎞 Tap to Screen — MiniMax H3 lip-sync MV on your own song (multi-scene timeline) · H3 Timeline v1.3.3

    A simple ComfyUI workflow that turns your own song and your pictures into a lip-synced music video with MiniMax H3. Play the song on a timeline and tap the keys where the scenes should change and where the singing starts and stops. No LLM, no YuE2, no score, and only one custom node folder to install.

    ✨ Features

    • 🎞 Timeline editor at the bottom of the ComfyUI page: drop your song and pictures, then play it back with the waveform

    • ✂ Live cutting: press C while the song plays and each scene ends exactly where you press (1–15 s each; scenes are added as you go, up to 64)

    • 🎬 Scenes as you like: insert, duplicate, split (also C while stopped), delete (several at once with Shift/Ctrl+click, or the last one with -) and reorder scenes on the timeline; the nodes are added and removed for you

    • 🎤 Lip sync: each scene's piece of the song goes to H3 unchanged as <Audio 1>. Press S where the singing starts and stops, and H3 sings only inside those spans

    • 🖼 First frame lock: each scene starts exactly on its picture (ComfyUI's Add Guide); switch it off per scene to use the picture only as a reference

    • ⛓ Continue the previous scene: one click at a cut makes the frame right after the previous scene's cut the next scene's first frame, so the shot carries on

    • 🧑 Characters (up to 4): a picture and a name for each person. Choose who is in each scene and who sings (one character, or everyone); their pictures go to H3 as <Picture 2>, <Picture 3>, … so faces, hair and clothes stay the same. Call them by name in your text, and add a role if you like (e.g. lead vocalist)

    • 👥 Group photo: one photo of everyone together, so faces, heights and clothes match side by side. Used in the scenes where everyone appears (or in / out per scene)

    • 🔒 Audio lock: each scene's piece of the song is anchored on H3's audio track in time while it generates (ComfyUI's own Add Guide), so the lips and the beat stay with the music. Per scene; the finished video keeps the original song

    • Transitions: cut, crossfade, dip to black or dip to white. The crossfade blends the previous scene while it is still moving

    • 🧩 Redo one scene: change a scene's text, picture or timing (or press 🎲 Another take) and only that scene is made again; the others stay cached

    • Low memory: each scene is saved to disk as soon as it is made and joined at the end. The workflow needs about one scene's worth of RAM, not the whole video; with decode = stream on the 💾 nodes (v1.3.1) only one 17-frame chunk, same pixels

    • 📤 Export for editing (v1.3.2): the 📤 Export button on the timeline writes a ProRes 422 HQ, ProRes 4444 or FFV1 lossless master, encoded once, straight from the raw frames (no mp4 in between), and, if you tick it, every scene as its own clip with the extra frames past the cut, its part of the song and a csv of start times, plus timeline.edl (v1.3.3: import it and every clip is already in place and trimmed) and song.wav (the song for the whole video). Finish the cut and the transitions yourself in Resolve or Premiere

    • Prompts are written for you: the <Picture 1> / <Audio 1> definitions and the lip-sync line (with exact times) are added to your text

    • 💾 Civitai metadata (optional): one switch saves the video with ComfyUI-Video-Saver, including the prompt H3 got for each used scene, model, seed and steps

    • Japanese and English workflows are included

    ▶ How to use

    1. Press 🎞 Timeline at the bottom left of the canvas

    2. Drop your song (wav, flac, mp3, …) on the blue audio track

    3. Drop a picture on each clip (+ adds scenes; ⧉ ✂ 🗑 ← → below the timeline)

    4. Press Space to play and C where each scene should end

    5. Press S where the singing starts and S again where it stops. With no spans, H3 sings whenever it hears vocals

    6. Write each scene's text below the timeline (English works best)

    7. Press Run. The video is saved in output/video/

    8. Optional: 📤 Export at the top of the timeline, to also get an editing master and a clip per scene in output/h3tl/

    ⌨ Timeline controls

    • Space: play / stop · C: cut here · S: singing starts / stops

    • Drag a clip's right edge for its length (Shift = 0.1 s steps); Alt+drag moves only the cut, keeping the next scene's end. Drag the waveform to choose where in the song the video starts

    • 🎤 spans: drag the ends or the middle, and double-click to delete one. Double-clicking an empty spot adds one

    • Remove a scene's picture: ✕ on the clip, or select the clip and press Delete over the timeline

    • ⛓ at a cut: continue the previous scene (leave that scene's picture empty for a seamless continuation) · ◆: transition · mouse wheel: zoom

    • +🧑 / +👥 at the top: add a character or the group photo (drop a picture, type a name and role) · below the timeline: 🧑 In this scene and 🎤 Who sings for the selected scene

    • 📤 Export at the top: the codec (h264 / ProRes 422 HQ / ProRes 4444 / FFV1) and “also write a clip per scene”. The button lights up when it is not plain h264

    • Below the timeline: 🎲 Another take re-rolls only the selected scene (↺ = back to the shared seed) · 🔒: audio lock for that scene · 🧩 Per scene at the top: redo only the scenes you changed (on by default)

    📦 Requirements

    • A recent ComfyUI with the built-in MiniMax H3 nodes

    • models/diffusion_models/: minimax_h3_ref2va_pruned_int8_convrot.safetensors

    • models/loras/: minimax_h3_ref2v_turbo_4step_v0.1_comfyui_bf16.safetensors (Turbo, 4 steps)

    • models/text_encoders/: qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors

    • models/vae/: minimax_h3_video_vae_fp16.safetensors, minimax_h3_audio_vae_fp32.safetensors

    • Optional: ComfyUI-Video-Saver, only to save with Civitai metadata. Without it the workflow runs as usual (ComfyUI may list its two nodes as missing; you can ignore that)

    🔧 Install

    1. Copy custom_nodes/ComfyUI-H3Timeline into ComfyUI's custom_nodes/

    2. Restart ComfyUI and reload the page (Ctrl+F5)

    3. Drop a workflow from workflows/ onto the canvas

    📝 Notes

    • One scene is at most 15 s (H3's limit)

    • The timeline preview shows the stills with the song. H3 makes the real motion

    • av_shift on the board delays the finished video's sound against the picture (default 0; about 0.2 s if the motion lags without 🔒)

    • The temporary scene files (up to about 0.8 GB per scene, plus a ~30 MB latent file) are kept in temp/h3tl/ and cleared every time ComfyUI starts; plan on 20-30 GB free for a 3-minute video. If a scene's file goes missing, it is decoded again from its latent file automatically, and a full disk stops the run with a clear message

    • 📤 Export: plain h264 is what you always got (8-bit 4:2:0, the same settings as ComfyUI's Save Video). With ProRes or FFV1 the master goes to output/h3tl/<time-id>/final.mov (.mkv for FFV1), a new folder for every run, and output/video/ still gets an h264 viewing copy. Scene clips are scene_01.* … plus scenes.csv, timeline.edl and song.wav in the same folder. Checked in DaVinci Resolve 21. In Resolve: timeline at 24.000 fps, clips in the media pool, File → Import → Timeline → timeline.edl, then song.wav on an audio track at the start as the master sound (mute the clips' own audio). The clips carry extra frames past their cut, so don't lay them end to end at full length. ProRes is 10-bit, BT.709 video levels, PCM sound, no alpha; FFV1 keeps the RGB frames byte for byte. The source frames are 8-bit, so 10-bit adds no new tones; it keeps later edits from losing more. These files are big and are not cleaned up for you

    • Export files are written as *.part and get their real name only when complete; disk space is checked before writing, and export_complete.json is written last, so a folder without it did not finish

    • 🧩 Redoing one scene uses ComfyUI's normal cache (not --cache-none); restarting ComfyUI forgets the scenes it remembered. The shared 🎲 seed is fixed: change it to re-roll every scene

    • The 🚀 attention node is for Nvidia / AMD GPUs. Set it to pytorch attention if it doesn't fit your GPU


    🎞 Tap to Screen — 手持ちの曲で MiniMax H3 の口パク MV(マルチシーンのタイムライン)· H3 Timeline v1.3.3

    手持ちの曲と画像から、MiniMax H3 で口パクのミュージックビデオを作るシンプルな ComfyUI ワークフローです。タイムラインで曲を再生しながら、シーンを切る所と歌う所をキーで決めるだけ。LLM・YuE2・楽譜は使わず、入れるカスタムノードも 1 フォルダだけです。

    ✨ できること

    • 🎞 タイムライン:ComfyUI の画面の下に開く編集画面。曲と画像をドロップして、波形を見ながら再生できます

    • ✂ 再生しながらカット:曲を流しながら C を押すと、押した所でシーンが切れます(1 シーン 1〜15 秒・押すたびにシーンが増える・最大 64)

    • 🎬 シーンは自由に:タイムライン上で追加・複製・分割(停止中の C でも)・削除(Shift/Ctrl+クリックでまとめて、- で最後から)・並べ替え。ノードは自動で増減します

    • 🎤 口パク:各シーンの区間の曲をそのまま H3 の <Audio 1> に渡します。歌い始めと歌い終わりで S を押すと、その間だけ歌います

    • 🖼 最初のコマを画像に固定:各シーンが画像どおりに始まります(本体の Add Guide)。シーンごとにオフにすれば、画像は参考だけに

    • ⛓ 前のシーンから続ける:切れ目をクリックするだけで、前のシーンの切れ目の直後のコマが次のシーンの最初のコマになり、映像がつながります

    • 🧑 キャラ(最大 4 人):人物ごとに画像と名前を登録。シーンごとに「出る人」と「歌う人」(1 人/みんな)を選べて、出る人の画像を <Picture 2>・<Picture 3>… として渡し、顔・髪・服をそろえます。文章の中では名前で呼べて、役・説明も付けられます(例:lead vocalist)

    • 👥 全体写真:全員一緒の写真を 1 枚渡して、並んだ時の顔・背丈・服をそろえます。全員が出るシーンで使います(シーンごとに入れる/外すも可)

    • 🔒 曲を固定:各シーンの区間の曲を、生成中に H3 の音声トラックへ時間どおり固定(本体の Add Guide)。口やビートが曲からずれにくくなります。シーンごとに切替、完成動画の音は元の曲のまま

    • つなぎ方:cut/crossfade/dip to black/dip to white。crossfade は前のシーンが動いたまま重なります

    • 🧩 シーンだけ作り直す:シーンの文章・画像・タイミングを変える(または 🎲 別テイク)と、そのシーンだけ作り直し。ほかのシーンはキャッシュのまま

    • 省メモリ:各シーンはできたらすぐディスクに保存して、最後につなぎます。メモリは動画全体ではなく「1 シーンぶん」で済みます。💾 ノードの decode = stream(v1.3.1)なら 17 コマの塊ぶんだけ(画は同じ)

    • 📤 編集用に書き出す(v1.3.2):タイムラインの 📤 書き出し ボタンで、ProRes 422 HQ/ProRes 4444/FFV1 ロスレス のマスターを、生のフレームから 1 回のエンコードで書き出せます(途中で mp4 を挟みません)。チェックを入れれば 各シーンを 1 本ずつのクリップ でも(切れ目の先の余りコマ・そのシーンの曲・開始秒の csv つき)。さらに timeline.edl(v1.3.3:読み込むと各クリップが正しい位置に切られた状態で並ぶ)と song.wav(動画全体ぶんの曲)も。カットやトランジションの仕上げを Resolve や Premiere でできます

    • プロンプトは自動で整えます:<Picture 1>・<Audio 1> の定義と、時刻入りの口パクの指示を書いた文章に足します

    • 💾 Civitai メタデータ(任意):スイッチ 1 つで、ComfyUI-Video-Saver を使って、使ったシーンぶんの H3 のプロンプト・モデル・seed・steps 付きで保存

    • 日本語版・英語版のワークフロー入り

    ▶ 使い方

    1. キャンバス左下の 🎞 タイムライン を押す

    2. 曲(wav・flac・mp3 など)を青い段にドロップ

    3. 各クリップに 画像 をドロップ(+ でシーンを追加・下の欄で ⧉ ✂ 🗑 ← →)

    4. Space で再生して、シーンを切りたい所で C

    5. 歌い始めで S、歌い終わりでもう一度 S(付けなければ、声が聞こえたら歌う)

    6. タイムラインの下の欄に、各シーンの文章を書く(英語がおすすめ)

    7. 実行。output/video/ に保存されます

    8. お好みで:タイムライン上部の 📤 書き出し で、編集用マスターとシーンごとのクリップも output/h3tl/ に

    ⌨ タイムラインの操作

    • Space:再生/停止・C:ここで切る・S:歌い始め/歌い終わり

    • クリップの右端をドラッグで秒数(Shift で 0.1 秒刻み)、Alt+ドラッグで切れ目だけ動かす(次のシーンの終わりはそのまま)、波形を左右にドラッグで曲のどこから使うか

    • 🎤 帯:端や真ん中をドラッグ、ダブルクリックで削除(空いた所のダブルクリックで追加)

    • シーンの画像を外す:クリップの ✕、またはクリップを選んでタイムラインの上で Delete

    • 切れ目の ⛓:前のシーンから続ける(きれいに続けたい時は、そのシーンの画像は空のまま)・◆:つなぎ方・ホイール:拡大縮小

    • 上の +🧑/+👥:キャラや全体写真を追加(画像をドロップして名前・役を入力)・下の欄:選んだシーンの 🧑 出る人 と 🎤 歌う人

    • 上の 📤 書き出し:コーデック(h264/ProRes 422 HQ/ProRes 4444/FFV1)と「シーンごとのクリップも書き出す」。h264 だけ以外の時はボタンが光ります

    • 下の欄の 🎲 別テイク:選んだシーンだけ引き直し(↺ で共通の seed に戻す)・🔒:そのシーンの曲の固定・上の 🧩 シーン単位:変えたシーンだけ作り直す(標準でオン)

    📦 必要なもの

    • MiniMax H3 のノードが標準で入っている、新しい ComfyUI

    • models/diffusion_models/:minimax_h3_ref2va_pruned_int8_convrot.safetensors

    • models/loras/:minimax_h3_ref2v_turbo_4step_v0.1_comfyui_bf16.safetensors(Turbo・4 step)

    • models/text_encoders/:qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors

    • models/vae/:minimax_h3_video_vae_fp16.safetensors・minimax_h3_audio_vae_fp32.safetensors

    • 任意:ComfyUI-Video-Saver(Civitai メタデータ付きで保存する時だけ)。無くても普通に動きます(その 2 つのノードが「見つからない」と出ることがありますが、無視してOK)

    🔧 入れ方

    1. custom_nodes/ComfyUI-H3Timeline を ComfyUI の custom_nodes/ にコピー

    2. ComfyUI を再起動して、ページも再読み込み(Ctrl+F5)

    3. workflows/ のワークフローをキャンバスにドロップ

    📝 気をつけること

    • 1 シーンは 15 秒まで(H3 の上限)

    • タイムラインの再生は、静止画と曲での目安です(実際の動きは H3 が作ります)

    • ボードの av_shift で完成動画の音を映像に対して遅らせられます(標準 0。🔒 なしで動きが遅れるなら 0.2 秒くらい)

    • 途中のファイル(1 シーンあたり最大約 0.8GB+latent 約 30MB)は temp/h3tl/ に置き、ComfyUI を起動し直すと消えます。3 分の動画なら 20〜30GB の空きを見てください。消えていた時は latent ファイルから自動でデコードし直し、空き容量が足りない時は分かりやすいメッセージで止まります

    • 📤 書き出し:h264 だけなら今までどおり(8bit 4:2:0。ComfyUI の Save Video と同じ設定)。ProRes/FFV1 を選ぶと、マスターは output/h3tl/<日時-ID>/final.mov(FFV1 は .mkv)に実行ごとの新しいフォルダで書かれ、output/video/ には確認用の h264 も残ります。シーンごとのクリップは同じフォルダに scene_01.* … と scenes.csv・timeline.edl・song.wav。DaVinci Resolve 21 で確認済み。Resolve では:タイムラインを 24.000fps にして、クリップをメディアプールに入れ、ファイル → 読み込み → タイムライン → timeline.edl。song.wav を音声トラックの先頭に置いて基準の音に(クリップ側の音はミュート)。クリップには切れ目の先の余りコマが入っているので、端から端までそのまま並べないでください。ProRes は 10bit・BT.709 ビデオレベル・PCM 音声・アルファなし、FFV1 は RGB フレームをバイトそのまま。元のフレームは 8bit なので 10bit にしても階調は増えません(その後の編集で劣化させないための形式)。ファイルは大きく、自動では消えません

    • 書き出すファイルは *.part で書いて、完成してから正式な名前になります。空き容量は書く前に確認し、最後に export_complete.json を書きます(これが無いフォルダは途中で止まったもの)

    • 🧩 シーンだけ作り直すのは ComfyUI の普通のキャッシュを使います(--cache-none では効きません)。ComfyUI を再起動すると覚えていたシーンは消えます。共通の 🎲 seed は固定なので、全シーンを引き直す時は seed を変えてね

    • 🚀 attention ノードは Nvidia/AMD 用です。合わない時は pytorch attention にしてください

    Description

    v1.3.1 — memory housekeeping, bulk delete

    A patch after a memory review, plus two small editing conveniences: nothing changes in how the video is made.

    • 💾 No tensor stays in ComfyUI's cache for a finished scene. The handle used to keep the scene's latent (~30 MB per 15 s scene, so up to ~2 GB of RAM across 64 scenes) to be able to remake a pruned frames file; the latent now goes to a small .latent.pt file next to the frames (8 per scene kept) and is read back only when a remake is needed

    • 💾 New decode option on each "Decode & Save" node: full (default, as before: one scene's frames in RAM, ~3.2 GB for 15 s at 768×1024) or stream (each 17-frame chunk is written into the file as H3's VAE finishes it: ~0.2 GB in RAM, byte-identical pixels; falls back to full on a build without the chunk hook). Try stream; it becomes the default once confirmed on GPUs

    • Frames are converted to 8-bit in chunks of 8 (was 24): a smaller conversion buffer

    • Renamed H3 Timeline 4 → H3 Timeline (the 4 was the old fixed scene count); the Civitai title is now “Tap to Screen — MiniMax H3 lip-sync MV on your own song (multi-scene timeline)”. The workflow files are h3_timeline_v1.3.1*.json

    • 🎬 Scene editing: - next to the scene count deletes the last scene; Shift+click / Ctrl(⌘)+click select several clips and 🗑 deletes them at once (one scene always stays)

    • Docs: RAM / disk figures per scene, and a note that "VAE Decode (Tiled)" changes nothing for H3 (its VAE already decodes in chunks)

    v1.3.1 — メモリまわりの手入れ・まとめて削除

    メモリのレビューを受けてのパッチに、編集の小さな便利を 2 つ。動画の作り方は変わりません。

    • 💾 できあがったシーンのテンソルを ComfyUI のキャッシュに残さない。これまでハンドルが(消えたフレームファイルを作り直すために)シーンの latent を持っていました(15 秒で約 30MB、64 シーンだと最大約 2GB の RAM)。latent はフレームの隣の小さな .latent.pt ファイルに置き(シーンごとに 8 つ保持)、作り直しが必要な時だけ読み戻します

    • 💾 各「デコードしてファイルへ」ノードに decode を追加:full(標準・今までどおり。1 シーンぶんのフレームを RAM に。15 秒・768×1024 で約 3.2GB)か stream(H3 の VAE が 17 コマの塊を仕上げるたびにファイルへ書く。RAM 約 0.2GB、画はバイト単位で同じ。塊の受け口がない環境では自動で full に)。試してみてください。GPU で確認でき次第、標準にします

    • 8bit への変換は 8 コマずつ(24 から)。変換バッファが小さくなります

    • 名前を H3 Timeline 4 → H3 Timeline に(4 は昔の「4 シーン固定」の名残)。Civitai のタイトルは「Tap to Screen — MiniMax H3 lip-sync MV on your own song (multi-scene timeline)」に。ワークフローのファイル名は h3_timeline_v1.3.1*.json

    • 🎬 シーン編集:シーン数の横の - で最後のシーンを削除。Shift+クリック/Ctrl(⌘)+クリックで複数のクリップを選んで 🗑 でまとめて削除(1 本は必ず残ります)

    • 説明:シーンあたりの RAM/ディスクの目安と、「VAE Decode (Tiled)」は H3 では意味がない(VAE が元から塊でデコードする)ことを追記

    v1.3 — scenes as you like

    Insert, duplicate, split, delete and reorder scenes on the timeline, up to 64 instead of a fixed 4.

    • 🎬 Scene editing in the row under the timeline and in the clip's right-click menu: + insert after, ⧉ duplicate, ✂ split (the second half continues with ⛓; C while stopped does the same), 🗑 delete, ← → move. The scene's nodes are created and removed for you

    • Each scene has a stable id, so moving or deleting one keeps the others' pictures, texts and cached results; a ⛓ scene whose predecessor changed is switched to its own picture and you are told

    • The per-scene cache is always on with dynamic scenes; only the changed scenes are made again

    • A v1.2 workflow keeps working and switches to dynamic scenes at its first scene edit. The board's old scene widgets only mirror the timeline now

    • Up to 64 scenes (each adds ~12 nodes and up to ~0.9 GB of temp); one scene is still at most 15 s

    • Alt+drag on a cut moves only the cut (the next scene's end stays put); a plain drag still changes that scene's length

    • Fixed: the live C past 15 s stalled; the node layout no longer overlaps once pictures are set

    v1.2 — redo one scene, first frame lock

    Fix one scene without making the whole video again, and start each scene exactly on its picture.

    • 🖼 First frame lock (default on, per scene): the scene's own picture is anchored as its first frame with ComfyUI's Add Guide, like ⛓ does with the previous scene. Before, the picture was only a reference and H3 often started from a slightly different image

    • 🧩 Only the scenes you changed are made again: change a scene's text, picture, 🎤, cast or 🔒 and only that scene runs; the others stay cached. A length change re-makes that scene and the ones after it (they move in the song), a 🎤 span only the scenes that hear it, av_shift only the join

    • 🎲 Another take (below the timeline): re-roll one scene with its own seed, without re-reading its text. ↺ goes back to the shared seed

    • How: each scene gets its own 🧩 plan with only what it depends on (filled in from the board by the timeline), and the ⛓ links exist only where a scene continues

    • The shared seed is now fixed (it was "randomize", which re-made every scene on every run)

    • 🧩 Per scene: off brings back the v1.1 way (all scene prompts first, fewer model swaps, every edit re-makes all scenes)

    • The join stops with a message if a saved scene was made for other timeline numbers, instead of mixing them

    v1.1 — several characters, a group photo and audio lock

    The single 🧑 character is now a small cast, for duets and bands.

    • 🧑 Up to 4 characters, each with a picture, a name and an optional role (e.g. lead vocalist). Call them by name in your scene text

    • 👥 Group photo: one photo of everyone together, so faces, heights and clothes match side by side. By default it is used only in scenes where everyone appears; a solo scene gets the individual pictures only (or force it in / out per scene)

    • The prompt says the 🧑 / 👥 pictures are look references only and the framing comes from the scene picture; a <Picture n> you define yourself is kept and the others still get their lines

    • 🧑 In this scene: choose who appears in each scene. Only their pictures go to H3, numbered <Picture 2>, <Picture 3>, … without gaps, and the clips show their faces

    • 🎤 Who sings per scene: auto, one character (the others keep their mouths closed), or everyone

    • 🔒 Audio lock (per scene, auto = lip-sync scenes): the scene's piece of the song is put on H3's audio track in time, so the mouth and the beat stay with the music. Default method frozen (the song as the audio track, kept by a mask; confirmed on H3); anchor (a keyframe at frame 0) stays as an experimental option. The finished video still gets the original song

    • av_shift now defaults to 0 (the song exactly as H3 heard it); set it yourself if the motion lags

    • Fixed: the ⚡ Turbo switch node had the save switch's title

    v1.0 — first release

    The first public version of H3 Timeline 4: a simple MiniMax H3 workflow that turns your own song and 1–4 pictures into a lip-synced music video. Set the cuts and the singing on a timeline while the song plays.

    • 🎞 Timeline editor: drop your song and pictures, then play it back with the waveform

    • ✂ Press C while playing to cut, and S to mark where the singing starts and stops

    • 🎤 Lip sync from your own song (each scene's piece goes to H3 as <Audio 1>)

    • ⛓ Continue the previous scene, and 🧑 keep the same character in every scene

    • Transitions: cut, crossfade, dip to black, dip to white

    • Low memory: about one scene's worth of RAM, even for 4 × 15 s

    • 💾 Optional Civitai metadata save (ComfyUI-Video-Saver): the prompts H3 got for the used scenes, model, seed, steps

    • Japanese and English workflows, and only one custom node folder

    v1.3 — シーンは自由に

    タイムライン上でシーンを追加・複製・分割・削除・並べ替え。4 シーン固定から最大 64 シーンに。

    • 🎬 シーンの編集:タイムラインの下の欄とクリップの右クリックから、+ 後ろに追加・⧉ 複製・✂ 分割(後半は ⛓ で続く。停止中の C も同じ)・🗑 削除・← → 移動。シーンのノードは自動で増減します

    • 各シーンに安定した ID があるので、移動や削除をしてもほかのシーンの画像・文章・キャッシュはそのまま。⛓ で続いていたシーンの「前」が変わった時は、自分の画像から始まる設定に戻して知らせます

    • シーンを足した状態では 🧩 シーン単位キャッシュは常にオン。変えたシーンだけ作り直します

    • v1.2 のワークフローもそのまま使えて、最初のシーン編集でこの方式に切り替わります。ボードの古いシーン欄はタイムラインの表示用に

    • 最大 64 シーン(1 シーンごとにノード約 12 個・temp 最大約 0.9GB)。1 シーンは今までどおり 15 秒まで

    • Alt+切れ目のドラッグで、切れ目だけ動かせます(次のシーンの終わりはそのまま)。普通のドラッグは今までどおり秒数を変える

    • 修正:再生中の C が 15 秒を超えると止まっていた。画像を入れたあとノードが重なっていた配置

    v1.2 — シーンだけ作り直す・最初のコマの固定

    動画全体を作り直さずに 1 シーンだけ直せて、各シーンが画像どおりに始まるようになりました。

    • 🖼 最初のコマを画像に固定(標準オン・シーンごと):シーンの画像を、本体の Add Guide で最初のコマに固定(⛓ が前のシーンを固定するのと同じ仕組み)。前は画像が参考だけで、H3 が少し違う絵から始めることが多かった

    • 🧩 変えたシーンだけ作り直し:シーンの文章・画像・🎤・出る人・🔒 を変えると、そのシーンだけ生成して、ほかはキャッシュのまま。秒数を変えるとそのシーンと後ろのシーン(曲の中の位置がずれるため)、🎤 の帯はそれを聞くシーンだけ、av_shift は結合だけ

    • 🎲 別テイク(タイムラインの下の欄):そのシーンだけ seed を変えて引き直し(文の読み込みはやり直さない)。↺ で共通の seed に戻す

    • しくみ:各シーンに、そのシーンに関係することだけの 🧩 計画を渡して(タイムラインがボードから自動で書き込み)、⛓ のつながりは続くシーンにだけ付けます

    • 共通の seed は固定に(前は「毎回ランダム」で、実行のたびに全シーン作り直しでした)

    • 🧩 シーン単位:オフで v1.1 の方式に戻せます(全シーンの文を先に読む・モデルの入れ替えが少ない・何か変えると全シーン作り直し)

    • 保存されたシーンが別のタイミング用に作られていた時は、混ぜずに結合がメッセージで止まります

    v1.1 — キャラ複数・全体写真・曲の固定

    🧑 キャラ固定 1 人だったのを、デュエットやバンドにも使えるようにしました。

    • 🧑 キャラは最大 4 人。それぞれ画像・名前・役(任意・例 lead vocalist)を登録でき、シーンの文章の中では名前で呼べます

    • 👥 全体写真:全員一緒の写真を 1 枚渡して、並んだ時の顔・背丈・服をそろえます。標準では全員が出るシーンだけに渡し、ソロのシーンは人ごとの画像だけ(シーンごとに入れる/外すもできます)

    • 🧑/👥 の画像は「見た目の参考だけで構図はシーン画像から」と文で伝えます。自分で <Picture n> を定義した分はそのまま、ほかのキャラの分だけ足します

    • 🧑 出る人:シーンごとに出るキャラを選べます。出る人の画像だけを <Picture 2>・<Picture 3>… と詰めて H3 に渡し、クリップにも顔が出ます

    • 🎤 歌う人をシーンごとに:auto/キャラ 1 人(ほかの人は口を閉じる)/みんな

    • 🔒 曲を固定(シーンごと・auto=口パクのシーン):シーンの区間の曲を、H3 の音声トラックに時間どおり置いて生成。口やビートが曲からずれにくくなります。標準はフローズン(曲を音声トラックにしてマスクで固定・実機確認済み)、アンカー(0 コマ目のキーフレーム)は実験オプション。完成動画の音は元の曲のまま

    • av_shift の標準を 0 に(曲は H3 が聞いたとおりの位置)。動きが遅れる時は自分で設定

    • 修正:⚡ Turbo 切替ノードのタイトルが保存の切替のものになっていたのを直しました

    v1.0 — 初公開

    H3 Timeline 4 の最初の公開版です。手持ちの曲と 1〜4 枚の画像から、MiniMax H3 で口パクのミュージックビデオを作るシンプルなワークフローです。曲を再生しながら、タイムラインでカットと歌う所を決めます。

    • 🎞 タイムライン:曲と画像をドロップして、波形を見ながら再生

    • ✂ 再生中に C でカット、S で歌い始めと歌い終わり

    • 🎤 手持ちの曲で口パク(各シーンの区間の曲を H3 の <Audio 1> に渡します)

    • ⛓ 前のシーンから続ける・🧑 キャラ固定で全シーン同じ人物に

    • つなぎ方:cut/crossfade/dip to black/dip to white

    • 省メモリ:4 シーン×15 秒でも、メモリは 1 シーンぶん

    • 💾 Civitai メタデータ付き保存(任意・ComfyUI-Video-Saver):使ったシーンの H3 のプロンプト・モデル・seed・steps

    • 日本語版・英語版のワークフロー入り、カスタムノードは 1 フォルダだけ

    FAQ

    Workflows
    MiniMax H3

    Details

    Downloads
    87
    Platform
    CivitAI
    Platform Status
    Available
    Created
    11/9/2026
    Updated
    11/22/2026
    Deleted
    -

    Files

    H3Timeline_v1.3.1.zip

    Mirrors

    CivitAI (1 mirrors)